General Description
ERNiFeCr-1 is used for TIG, MIG and SAW welding of Incoloy 825 and other nickel-chromium-molybdenum-copper alloys. Incoloy Filler Metal 65 can be also used to overlay cladding where similar chemical composition is required.
Chemical Composition
| Grade | Ni% | C% | Mn% | Fe% | S% | Cu% | Si% | Al% | Cr% | Ti% | Mo% | P% |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-1 | 38.0-46.0 | Max 0.05 | Max 1.0 | Min 22.0% | Max 0.03 | 1.5-3.0 | Max 0.50 | Max 0.20 | 19.5-23.5 | 0.6-1.2 | 2.5-3.5 | Max 0.03 |
AWS A5.14, ERNiFeCr-1
ASME II, SFA-5.14, ERNiFeCr-1
UNS N08065
Forms
ERNiFeCr-1 is available on spool (Precision Layer Wound) and in cut straight lengths.
Straight Rods(TIG)-mm: 1.2-3.2
Spooled Wire (MIG)-mm: 0.8-1.2